Engine Flush Service

Oil changes are not enough. While oil filters remove particulate over 25 microns, sludge, varnish and wear metals less than 25 microns continue to circulate within the engine and accumulate in the passageways, oil pump and oil pan. These contaminate cause engine wear, higher operating temperatures, and reduced lubrication.

The Bilstein Engine Flush System is an environmentally safe system that thoroughly cleans your engine by using patented adaptors and specially formulated solutions to dissolve accumulations of sludge, tar, varnish and wear metals. The process is performed with the engine off. Using pulsating pressures, the Bilstein R-2000 circulates a heated petroleum distillate solution through the oil pump passage ways and reservoir to dissolve sludge. A perfectly clean engine means better performance, superior fuel economy and longer engine life.

The Bilstein R-2000 Engine Flush System will not harm your engine, ring seating, valve guides or seals. All residual oil and cleaning solutions are evacuated leaving a light mineral oil on critical wear surfaces.

Tests have shown that periodic sludge removal restores operational efficiencies and reduces harmful exhaust emissions. By reducing wear metals and corrosive contaminates a longer engine life can be expected. Over the decades, Bilstein has established a solid reputation for quality and reliability. Bilstein products are marketed worldwide only after extensive research and testing.

Service Interval Once a year or 15,000 miles. When you change from conventional motor oil to a full synthetic oil.